CHINESEENGLISH Welcome to the official website of Shenzhen Meiri Semiconductor Co., Ltd.!

Consultation Hotline:

0755-23004050

Hot Keywords:

PRODUCTS CENTER

Aluminum electrolytic capacitor
Bolt type Ox horn type Lead type Patch type Unpolarized capacitor Horizontal capacitor Fixed product Solid state capacitance Solid-liquid mixed capacitor Ultracapacitor
TOSHIBA

Part Naming Conventions for Previous Small Surface-Mount CMOS LDO Regulators


Example of Previous Small Surface-Mount CMOS LDO Regulators

  1. Toshiba CMOS Small Surface-Mount LDO regulator
  2. Pin count
  3.  
    • S: Single output
    • H: Dual output
  4. Distingishes differences in pin assignments among 5-pin single-output LDO regulators with a blank or the letter B or C.
    (The TCR6DAxxxx in an SM6 package and the TCR6DAxxxxU in a UF6 package, which are both dual-output LDO regulators, have different pin assignments.)
  5. Output voltage
    • Single-output LDO regulators: 18 = 1.8-V output, 285 = 2.85-V output
    • Dual-output LDO regulators: 1525 = 1.5- and2.5-V outputs
  6.  
    • D: Auto-discharge and internally pull-down at the CONTROL pin
    • Blank: No auto-discharge and no pull-down at the CONTROL pin
  7. Package
    • WBG: WCSP4
    • FE: ESV
    • U: UFV,UF6
    • No mark/A: SMV,SM6

Part Naming Conventions for New Small Surface-Mount CMOS LDO Regulators


Example of New Small Surface-Mount CMOS LDO Regulators

  1. Toshiba CMOS Small Surface-Mount LDO regulator
  2. Max output current
    • 2: 200 mA
    • 3: 300 mA
  3. Features
    Indicate function and performance by the combination of output current.
    Symbol Overcurrent
    Protection
    Thermal
    Shutdown
    Output
    Discharge
    Fast transient
    response
    Inrush current
    protection
    2B X X
    2E X X X
    2D X X X
    3D X X X X X
  4. Package
    • E: ESV
    • F: SMV
    • N: SDFN4
    • M: DFN4
    • G: WCSP4
  5. Output voltage
    • Single-output LDO regulators: 33 = 3.3-V output, 285 = 2.85-V output

Example of Small Surface-Mount Bipolar LDO Regulators


Small Surface-Mount Bipolar LDO Regulators

  1. Toshiba small surface-mount bipolar LDO regulator
  2. Pin count
  3. Circuit configuration
    This section shows the circuit configuration of a product.
    • S: single output
    • H: dual output with synchronous control
    • D: dual output with independent control
  4. The type of pin assignment
    When there is "S" to section 4, it shows pin assignment as follows.


    When there is "H" or "D" to section 4, the symbol here is no mark.

  5. When there is "S" to section 4 , the number here shows 10 times the value of its output voltage.
    When there is "H" or "D" to section 4, the number here is a serial number.
  6. Package
    • No mark: SMV
    • K: US8
    • U: UFV
Support:WANGCopyright © 2010-2020 Shenzhen Meiri Semiconductor Co., Ltd. All Right Reserved