功率放大器IC

中文｜繁体｜ English 您好！欢迎进入广东美日康电容器制造有限公司官网！

东芝元器件

PRODUCTS CENTER

Toshiba's 4-channel power amplifier ICs fabricated using a 0.13-μm process with the industry's lowest-in-class on-resistance provide high reliability.
Toshiba is expanding its portfolio of Class-KB power amplifier ICs to fulfill the market needs for low power consumption and environmental friendliness.

概念

This figure shows the concept of the 4-channel power amplifier ICs.

Contribution to ecology
产品介绍
产品阵容

Contribution to ecology in the case of using Toshiba original Class-KB Amp

这是KB级和AB级放大器二氧化碳每年排量的对比列表。

计算条件

放大器的使用时间：每年365天，每天4小时
放大器的音频输出功率: 2 W

使用寿命评估(LCA)计算条件

汽油到放大器的总能量转换效率: 18.9%
汽油到电源的转换系数: 0.104升/千瓦时

产品介绍

Current-Feedback 4ch Power Amplifier IC for Car Audio with Built-In Full-Time Offset Detection: TCB502HQ更多

Toshiba Corporation’s Storage & Electronic Devices Solutions Company today announced the launch of the TCB502HQ, a 4-channel power amplifier IC that detects output offset voltage that is a factor in speaker burnout. Mass production is scheduled to start in December 2016.
To respond to growing demand for superior sound quality of car audio, the new IC integrates a current-feedback system of the type adopted in high-end hi-fi audio. This prevents sound quality degradation at wide bandwidths and offers consistent sound quality, considering overtone of musical instruments or human voice.
The new IC also integrates a newly developed, full-time offset detection circuit. It detects offsets generated at the output stage even during playback and contributes to reduction of field failures, thus helping ensure high reliability.

Maximum Output Power:
49W×4ch(V_CC=15.2V, R_L=4Ω, MAXPOWER)
Output Noise Voltage: 33 µV (BW=A-weigh)
Operating Supply Voltage: 6 ～18 V (4Ω), 6 ～16 V (2Ω)
Package: HZIP25-P-1.00F

Embedded Functions and Features:
- High output and low distortion
- Built-in mute and standby functions, offset detection, and short-circuit detection
- 6 V operation (engine idling reduction)
- A range of protection circuits (thermal, overvoltage, output to VCC, output to GND, output to output)

45-W class 4-channel power amplifier IC with using a new CD-0.13 process: TCB001HQ更多

The engine with an idle reduction system is shut down when the vehicle stops, causing the battery voltage to drop instantaneously. The new power amplifier reduces the minimum operation voltage from 8 V to 6 V, and thereby realizes stable amplifier operation, making it possible to prevent sound loss and noise in car audio.
"TCB001HQ" improves noise tolerance with a newly developed filter circuit, and minimizes the influence of cell phone radio waves on the sound. Reinforced protection circuits realize high reliability.

Maximum Output Power:
45W × 4ch (V_CC=15.2V, R_L=4Ω, MAXPOWER
Output Noise Voltage: 55 µV (BW=DIN_AUDIO)
Operating Supply Voltage Range: 6 to 18 V (4Ω)
Package: HZIP25-P-1.00F

Embedded Functions and Features
- High output power and low distortion
- Built-in mute and standby functions
- Optional functions (output DC offset detection,
  output short detection, and overvoltage detection)
- Support start-stop compatibility (prevention of instantaneous
  voltage drop on entry to an idle reduction mode)
- Support excellent GSM noise immunity
- Variety of protection circuits (thermal shutdown, overvoltage, short-to-VCC, short-to-GND and short-to-load)

Current-Feedback 4ch Power Amplifier IC for Car Audio with Built-In Full-Time Offset Detection: TCB501HQ更多

"TCB501HQ" integrates a newly developed, full-time offset detection circuit. Conventional offset detection during sound reproduction is difficult.It detects output DC offset voltage caused by leakage from the input capacitor and other sources, even during sound reproduction, and prevents speaker burnout.
It also integrates a current-feedback system of the type adopted in high-end hi-fi audio. This prevents sound quality degradation at wide bandwidths and offers consistent sound quality.

Maximum Output Power:
49W × 4ch (V_CC=15.2V, R_L=4Ω, MAXPOWER)
Output Noise Voltage: 33 µV (BW=A-weigh)
Operating Supply Voltage Range:
6 to 18 V (4Ω), 6 to 16V (2Ω)
Package: HZIP25-P-1.00F

Embedded Functions and Features
- High output power and low distortion
- Built in mute and standby functions, offset detection, and high side switch driver
- 6V operations (Engine idling reduction capability)
- Variety of protection circuits (thermal, overvoltage, shorted to V_CC, shorted to GND and shorted load)

用于车辆外部声音输出的音频功率放大器IC: TB2909FNG更多

没有内燃发动机的混合电动汽车（HEV）和电动汽车（EV）在纯电动模式下运行的非常安静，因此这些汽车正在越来越多地配备电动汽车报警声音系统，来模仿发动机的轰鸣声，这样在这些汽车靠近时行人才能有所察觉。“TB2909FNG”可保证在高达110°C的温度下运行，因此可用于电动汽车报警声音系统，因为这种工作环境要求IC必须能在高温下稳定运行。该IC还集成了各种各样的异常检测功能和保护电路，有助于汽车系统的安全和简化。

最大输出功率:
5W × 1ch (V_CC=16V, R_L=8Ω, JEITA最大)
3W × 1ch (V_CC=12V, R_L=8Ω, JEITA最大)
总谐波失真: 0.08% (P_OUT=0.125W)
输出噪声电压: 55 µV
工作电源电压: 6 至 16 V
工作温度范围: Ta= -40 至 110°C
封装: TSSOP16

内嵌功能和特征:
- 内置静音、待机功能
- 多种异常检测功能（扬声器断路、至GND或VCC的输出短路、高温和过载检测）
- 多种保护线路（过热保护、过压保护、输出短路至VCC、输出短路至GND、短路负载）

产品阵容

一款4通道功率放大器集成电路产品阵容

器件型号	最大输出		级别	电压增益	I²C总线	输出直流电补偿检	限幅检测	短路电流检测	高端开关	半短路检测	扬声器烧损防止	2-Ω负载	支持GSM抗噪	6V ope- rations	封装
器件型号	V_CC= 15.2 V	V_CC= 14.4 V	级别	电压增益	I²C总线	输出直流电补偿检	限幅检测	短路电流检测	高端开关	半短路检测	扬声器烧损防止	2-Ω负载	支持GSM抗噪	6V ope- rations	封装
TB2941HQ	49W	44W	AB	26dB											HZIP25
TB2938HQ	49W	44W	AB	26dB											HZIP25
TB2996HQ	49W	44W	AB	26dB											HZIP25
TB2952AHQ	49W	44W	AB	26dB/ 16dB											HZIP25
TB2975HQ	49W	44W	KB	26dB/ 16dB											HZIP25
TB2925HQ	49W	44W	KB	26dB											HZIP25
TCB001HQ	45W	39W	AB	26dB											HZIP25
TCB001FNG	45W	39W	AB	26dB											HSOP36
TCB501HQ	49W	44W	AB	26dB											HZIP25
TCB502HQ	49W	44W	AB	26dB											HZIP25
TCB701FNG	49W	44W	TB	26dB/ 16dB											HSOP36

一款1通道功率放大器集成电路产品阵容

器件型号	最大输出		级别	电压增益	过热检测	扬声器开路检测	短路电流检测	过电压检测	备注
器件型号	V_CC = 16 V	V_CC = 12 V	级别	电压增益	过热检测	扬声器开路检测	短路电流检测	过电压检测	备注
TB2909FNG	5W	3W	AB	Valiable					汽车报警声音系统

* 本文中涉及到的系统和产品名称可能是相关公司或组织的商标或注册商标。

Part Number	Description	Package	View

友情链接：阿里巴巴店铺 360

18998946834（微信同号）

东芝元器件